-->
🏠 🔍
SHAREOLITE

Radware App director - View / Add / Delete Interface IP - SOLVED

In this post , we present the options present in Radware App director to assign an Interface IP to a specific interface port , view the list of Interface IPs assigned to different ports.

From Web interface select the option - Router -> Routing Table -> IP Interface Parameters


List of Interface IPs assigned to different ports are displayed as below


To create / assign a new interface IP select the option Create


 Well, these may be also performed via command line using the below commands

AppDirector# net ip-interface get

        Interface Table


▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
IP Address                ▒Network Mask              ▒If Number                 ▒VlanTag                   ▒Peer Address
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
10.10.10.100              ▒255.255.255.0             ▒G-6                       ▒0                         ▒10.10.10.101
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒



Create an Interface IP using command line : 

Syntax  : net ip-interface create/add  <IP Address> <Network Mask> <If Number>  <-switch value>
Example : net ip-interface add 10.10.10.100 255.255.255.0 G6


Comments

–>